Airwheel News

Home / Airwheel News

How to Wear and Use Airwheel C8 Racing Smart Helmet?

Abstract: Airwheel combines its industrial advantage with the era development, keeps working hard to create a life full of fun and freedom and releases its latest fruit – Airwheel C8 intelligent racing helmet.
 

With more and more users wearing the Airwheel C8 smart helmets, it is essential to answer several questions which the public concern.

racing helmet

 

First, the following steps shows show to wear Airwheel C8 racing helmet. The helmet is properly worn in the head with the camera in a horizontal state during the ride. Close the helmet mask to effectively prevent the dust, debris into the nose and mouth, so as to ensure a smooth ride. Fasten the buckle and adjust the length of the straps. Fasten or loosen straps to ensure wearing comfort. Fasten the helmet safely to make sure the helmet cannot waggle forward or backward wildly. Finally, the adjustment can be realized via fastening or loosening straps.

racing helmet C8

 

Secondly, how to use Airwheel C8 full face helmet will be answered. Before usage, connect the power switch. The factory default power state is off-position and the mask protective film needs to be removed. Connect the helmet to the power supply (power adapter or computer USB interface, etc.) via the Micro 5PIN USB cable to charge (charge first before use). Then, insert the TF card in the direction of the arrow, until the TF card does not pop up, and then push the TF card, you can remove it. (Note: the recommended reading speed is 80MB/S, TF card of video class 10 or above).

Airwheel intelligent helmet

 

Thirdly, it is worth nothing that there are two connection ways—Bluetooth connection and DV connection. For the Bluetooth connection, you need to long press the Bluetooth switch. It means successfully connected when hearing the prompt tone. Then, access to phone setting, turn on the Bluetooth, go to Bluetooth search page, click C8 helmet heads up display to connect. It means successfully connected when hearing the prompt tone. For the DV connection, you need to long press the switch key. It means successfully connected when hearing the prompt tone and the light is solid green. And then short press to shoot videos and short press again to stop.

Please contact us if you have any question about the usage of Airwheel C8 smart helmet.